Shaw Pacific Ridge Porcelain Tile 32x32 – 555TS

Need a Sample? Click Here to Request Free Samples

Free shipping on orders over 750 sq ft of Shaw flooring. See shipping details.

Shaw Pacific Ridge 32x32 Large-Format Stone-Look Porcelain Tile

Shaw Pacific Ridge 32x32 (Shaw style 555TS) is a large-format porcelain tile with a matte, limestone-meets-concrete glaze, nominal 32" x 32" and actually 31.57" x 31.57". It is the biggest and thickest Pacific Ridge tile, at 0.394", and each piece covers about 6.9 sq ft, so a floor has far fewer grout joints and reads almost like a poured surface. The matte finish fits that slab-like look. It is rated wet CoF 0.42 or higher, frost resistant, and available in Sand, White and Grey.

Best for: Great rooms, open kitchens, large entries, contemporary living spaces, and patios.

Colors

• Sand 00120: warm beige that keeps a large modern floor from feeling cold.
• White 00150: a pale stone white that gives an open plan a loft-like airiness.
• Grey 00500: a concrete gray with the look of a poured concrete floor.

Why Choose Pacific Ridge 32x32

• 31.57" squares, about 6.9 sq ft per tile, for minimal grout lines
• 0.394" thick, the thickest Pacific Ridge format
• Low-sheen matte face, wet CoF 0.42 or above
• Frost resistant for patios
• 13.78 sq ft per box

Where to Install

Shaw rates Pacific Ridge 32x32 for floors and walls, though its scale pays off most in large open rooms. It is frost resistant, so it can continue outside onto a patio. Plan on a flat, well-prepared substrate and a professional installer for this size.

Frequently Asked Questions

Is 32x32 tile hard to install? Shaw Pacific Ridge 32x32 weighs more and spans farther than standard tile, so the floor must be very flat, each piece back-buttered and leveled with clips; most homeowners hire an installer experienced with large panels.

Is 32x32 tile too big for a small room? In rooms under about 100 sq ft, Shaw Pacific Ridge 32x32 can leave narrow slivers at the walls; the Pacific Ridge 13x13 or 18x18 usually fits small rooms better.

How much does a box of Pacific Ridge 32x32 cover? One box of Shaw Pacific Ridge 32x32 holds 13.78 sq ft, so plan about 21 boxes for 250 sq ft with 15% overage.

Can Pacific Ridge 32x32 be used outside? Yes. Shaw Pacific Ridge 32x32 is frost resistant with a wet CoF of 0.42 or higher, so it can extend a living room floor onto a patio for a continuous indoor-outdoor look.

What grout joint works for 32x32 porcelain? With Shaw Pacific Ridge 32x32, a narrow joint of about 1/8" in a grout matched to the tile color keeps the floor reading as one large surface.

Product Specs

• Style: Pacific Ridge 32x32 #555TS
• Brand: Shaw Floors
• Look: Limestone and concrete look
• Material: Glazed Porcelain
• Size: 31.57" x 31.57" (nominal 32" x 32")
• Thickness: 0.394"
• Finish: Matte
• Shade Variation: Moderate (V2)
• Water Absorption: ≤ 0.50% (impervious)
• Wet DCOF: ≥ 0.42
• Break Strength: ≥ 250 lbf
• Frost Resistant: Yes
• Use: Floors and walls, interior and exterior
• Sq. Ft. Per Box: 13.78
• Minimum Order: 250 sq. ft.
• Made In: Turkey
• Complete Specs: View spec sheet
• Warranty: View Shaw tile warranty

Design Pairing Guide

Sand pairs with natural linen sofas, rattan, oak and brushed bronze. White suits minimalist rooms with black metal, white walls and a light grout. Grey pairs with walnut, leather and blackened steel, grouted in a matching gray.

Browse more porcelain tile, or compare the mid-size Pacific Ridge 18x18.