Shaw Pacific Ridge Porcelain Tile 12x24 – 554TS

Need a Sample? Click Here to Request Free Samples

Free shipping on orders over 750 sq ft of Shaw flooring. See shipping details.

Shaw Pacific Ridge 12x24 Limestone-Look Matte Porcelain Tile

Shaw Pacific Ridge 12x24 (Shaw style 554TS) is a matte glazed porcelain tile with a limestone and concrete look, sized nominal 12" x 24" (actual 11.76" x 23.54"). Of the four Pacific Ridge sizes, the 12x24 is the only rectangle: it can run in a 1/3 offset to lengthen a room or stack vertically on a shower wall, while the squares form grids. The matte surface keeps the stone texture understated, which works in modern and transitional homes alike. Pacific Ridge comes in three neutral colors, is rated wet CoF 0.42 or higher, and is frost resistant for patios.

Best for: Kitchen and bath floors, shower walls, open living areas, mudrooms, and patios in freezing climates.

Colors

• Sand 00120: a warm, sandy beige stone tone that pairs with wood trim.
• White 00150: a light, clean stone-look white for bright modern bathrooms.
• Grey 00500: a neutral gray that leans toward an urban concrete look.

Why Choose Pacific Ridge 12x24

• Rectangular 12x24 format for offset, stacked or vertical layouts
• Matte glaze with a wet CoF of 0.42 or higher
• 0.50% or less water absorption
• Frost resistant for indoor-outdoor continuity
• 0.354" thick, 11.62 sq ft per box

Where to Install

Pacific Ridge 12x24 is floor rated, so it is suitable for floors and walls: kitchens, bathrooms, showers, laundry rooms, basements and living areas. Its frost rating means the same tile can carry outside to a patio or porch in a cold climate, set over a suitable exterior base.

Frequently Asked Questions

Is Pacific Ridge a limestone look or a concrete look? Shaw Pacific Ridge reads as a soft blend of limestone and concrete, a matte, stone-textured porcelain that suits both modern and traditional rooms. The 12x24 size shows that texture in a rectangular format.

Can Pacific Ridge 12x24 be used outdoors? Yes. Shaw Pacific Ridge 12x24 carries a frost-resistant rating and a wet CoF of 0.42 or higher, which makes it suitable for patios and porches where winters freeze.

Pacific Ridge 12x24 or 32x32: which is better for an open floor plan? For a very large open area, the Pacific Ridge 32x32 shows the fewest grout lines; Shaw Pacific Ridge 12x24 is easier to install, handles hallways better and can also go on walls.

What grout color works with Pacific Ridge Grey? For Shaw Pacific Ridge 12x24 in Grey, a matching medium gray grout gives a seamless concrete-slab look, while a lighter grout defines each tile.

How many boxes of Pacific Ridge 12x24 do I need for 250 sq ft? Each box of Shaw Pacific Ridge 12x24 covers 11.62 sq ft. For 250 sq ft plus 10% overage, order about 24 boxes.

Product Specs

• Style: Pacific Ridge 12x24 #554TS
• Brand: Shaw Floors
• Look: Limestone and concrete look
• Material: Glazed Porcelain
• Size: 11.76" x 23.54" (nominal 12" x 24")
• Thickness: 0.354"
• Finish: Matte
• Shade Variation: Moderate (V2)
• Water Absorption: ≤ 0.50% (impervious)
• Wet DCOF: ≥ 0.42
• Break Strength: ≥ 250 lbf
• Frost Resistant: Yes
• Use: Floors and walls, interior and exterior
• Sq. Ft. Per Box: 11.62
• Minimum Order: 250 sq. ft.
• Made In: Turkey
• Complete Specs: View spec sheet
• Warranty: View Shaw tile warranty

Design Pairing Guide

Sand pairs with white oak cabinets, warm white walls and brushed brass, set with a beige grout. White suits a black-and-white scheme with matte black faucets, or a Scandinavian bath in birch. Grey works with navy or forest-green cabinetry, stainless appliances and a matching gray grout.

Browse more porcelain tile, or see the square Pacific Ridge 18x18.